Cisco C9105AXI-H, Catalyst 9105AX Indoor Access Point

Software:-
Catalyst 9105 AXI-
● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
● Cisco IOS ® XE Software Release 17.3.1, or later

Supported wireless LAN controllers:-
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities:-
● 2x2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support

802.11ac:-
● 2x2 downlink MU-MIMO with two spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80- MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support

Integrated antenna:-
Catalyst 9105AXI-
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces:-
Catalyst 9105AXI-
● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
● Management console port (RJ-45)

Dimensions (W x L x H):-
● Access point (without mounting brackets): C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)