Delta ASD-B3-0221-M, AC Servo Drive 200W

Features:-
* Communication type: CANopen
* Connects directly to 230V-AC single-phase or 230V-AC three-phase (NOTE not suitable for 3 x 400VAC!)
* Rated output power: 200 W
* STO: standard SIL 2 in combination with a safety relay (IEC/EN 61800-5-2)
* Suitable for 24-bit absolute encoder (16,777,216 pulses per revolution, 46,603 pulses per degree)
* Supports new 6000RPM B3M servo motors (ECMA types were limited to 5000RPM)
High Response Bandwidth (3.1kHz instead of 0.5khz)
* Increased Load Tolerance (more deviation in mass inertia ratio allowed)
* Minimum cogging torque (50% improvement compared to B2 system)
* High-speed capture function
* Analog feedback PID control
* Vibration suppression functions (notch filters)
* Self-diagnosis and adjustment (advanced PID tuning function)
* B2 (ECMA) motors can also be controlled with a B3 servo driver (backwards compatible)
* DC Bus Sharing (connect the DC bus of several drivers to prevent the need for a regeneratove resistor)
* Smaller drive and motors compared to B2 system (up to 20% smaller driver, and up to 31% smaller servomotor)