EBS-260, Hand Held InkJet Printer 32 nozzle 56mm Print Height with Ink & Cleaner

Printer control On printer LCD screen
Via web browser (EBS Web User Interface editor – for online and offline operation)
Communication Wireless radio link, Wi-Fi 2,4 GHz
Range up to 100 m, depending on landform features
Interface languages available English, German, Polish, Russian, Italian, Chinese
Other languages can be added easily.
Print parameters Printout height from 11 to 57 mm
Height of object to be labeled from 39 mm to 115 mm
Number of text lines in one run: Up to 5 lines (for 5×5 dot text matrix)
Print lining – using multiple lines in one design: up to 10 printouts in one project (e.g. various contents in different places on an object)
Printhead 32 nozzles
Standard nozzle diameter: 150μm
Optional: 120μm, 170μm, 200μm
Height of object to be labeled: from 39 mm to 115 mm.
Print synchronized with speed of lower guide roller
Memory Amount of texts with print parameters is limited by printer memory – 2 GB, as standard
Special registers Dynamically adjusted text content in response to an event or action
Date and time in any format Valid thru datei
Counter: Count up Count down Cascade counters
Bar codes Data sent from external devices and computers (e.g. from databases)
Battery and Power Estimated run time with battery fully charged Up to 16 hours
Calculated for 60 printouts of 1 m in length, 550 dots/meter per hour, at about 20°C.
Power supply Battery – 6 Li–Ion battery pack. Capacity: 4400 mAh
Automatic low-battery charge
Battery re-charging Automatically with the power adapter DC 24V / 1.25 A
Charging time – under 300 minutes (< 5 h)
Charging cycles: 500 (a minimum of 70% of initial capacity)
Ink Monochrome Available in easily detachable containers
Available colors: white yellow blue green red black
Inks based on acetone, ethanol, MEK or water.
Capacity of ink container: 200 ml
Fonts Built-in TrueType fonts and EBS fonts in matrices: 32×24, 25×19, 16×10, 12×7, 7×5, 5×5, China11, China16
Graphics (logos, special characters) Texts and graphic symbols can be edited and printed with True Type fonts and UTF-8 coded (for inclusion of regional alphabet characters).
Graphic symbols, warning or transport marks, etc. – free raster graphics up to 32 dots in height.
Shapes: lines ellipses rectangles
Technical parameters
Position and attitude of printer in use: Any
Operating pressure: 0.015 MPa up to 0.045 MPa (0.15 bar up to 0.45 bar)
Operating temperature: from +5°C to +40°C
Storage temperature (over longer time):
From +1°C to +45°C for printer with water-based ink
From -10°C to +45°C for printer with inks based on MEK or ethanol
Humidity: up to 95% without steam condensation – for temperatures above dew point (it can operate when it rains, as long as printed surfaces are dry).