FLUKE-773, MILLIAMP PROCESS CLAMP METER

FLUKE 773 (AND 772) KEY FEATURES:
*Measure 4 to 20 mA signals without ‘breaking the loop‘ (five times faster than with traditional DMMs)
*Source 4 to 20 mA signals for testing control system I/O or I/Ps
*Simulate 4 to 20 mA signals for testing control system I/O
*Measure 4 to 20 mA signals with in-circuit measurement
*Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
   *Source mA output signals in a linear ramp or 25 % step output
*Automatically change the 4 to 20 mA output for remote testing
*Power saving features, auto-off, backlight timeout extend battery life

EXTRA FEATURES WITH THE 773
*DC voltage measurement to verify 24 V power supplies or voltage I/O signals
*Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
*Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
   *Output mA signal enables a logging DMM (289)or other device to record the 4 to 20 mA signal without breaking the loop
*mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
*Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA isolators
*Voltage output linear ramp or 25 % step output
*Automatically change the voltage output for remote testing