FLUKE FLK-FEV300/KIT UK, 1664FC MULTIFUNCTION TESTER & FEV300 EV CHARGING TEST ADAPTER KIT

The FLUKE 1664 FC Multifunction Tester Other Key Features:
*Insulation-PreTest safety function
*Insulation at L-N, L-PE, N-PE inputs
*Auto Test sequence
*Loop and line resistance—mΩ resolution
*Continuity at L-N, L-PE, N-PE inputs
*Test smooth dc sensitive RCDs (Type B/B+)
*Earth resistance
*Voltage True-rms (ac and dc) and frequency
*Wiring polarity checker, detects broken PE and N wires
*Insulation resistance
*Continuity and resistance
*Measure motor windings with continuity test (@ 10 mA)
*Loop and line resistance
*Prospective Earth Fault Current (PEFC/IK)
*Prospective Short-Circuit Current (PSC/IK)
*RCD trip time
*RCD trip current (ramp test)
*Measures trip time and current for RCD type A and AC in one test
*RCD variable test current
*Automatic RCD test sequence
*Phase sequence test
*Z Max Memory
*Memory
*IR-USB and BLE interface (when used with optional FLUKE DMS and FVF software)

FLUKE FEV300:
*Suitable to vehicle charging stations with charging mode 3
*Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
*PE Pre-Test: With this safety feature the PE conductor will be tested for possible presence of dangerous voltage against earth
*Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch the adapter can simulate various current capabilities of charging cables
*Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector all charging states can be simulated
*Separate phase indication by three LED lamps for easy check if voltage is present at the charging output
*Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests
*Compatibility: Integrates into Fluke portfolio of test and measurement tools, by allowing direct connection through FEV measurement terminals
*Simulation of CP error state “E”
*Simulation of PE error state “F” (Earth fault)
*Terminals for CP signal output to check communication between adapter (simulated electrical vehicle) and charging
*station. This can be measured by a ScopeMeter or multimeter
*The voltage level defines the charging modes and the duty cycle of this PWM (Pulse Width Modulation) signal defines the maximum allowable charging current
*IP 54 rating - Dust and splashing water protected