IFM LMT100, Sensor for Point Level Detection

Number of inputs and outputs- Number of digital outputs: 2
Factory setting- hydrous media
Process connection- threaded connection G 1/2 sealing cone

Special feature- Gold-plated contacts
Media- Liquids; viscous media; powder
Cannot be used for- See the operating instructions, chapter "Function and features".
Probe length[mm]- 11
Tank pressure- -1...40 bar -0.1...4 MPa
MAWP (for applications according to CRN)[bar]- 40

Electrical data:-
Operating voltage[V]- 18...30 DC
Current consumption[mA]- < 50
Protection class- III
Reverse polarity protection- yes
Measuring principle- capacitive

Outputs:-
Total number of outputs- 2
Output signal- switching signal; IO-Link
Electrical design- PNP/NPN
Number of digital outputs- 2
Output function- normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V]- 2.5
Permanent current rating of switching output DC[mA]- 100
Short-circuit protection- yes
Type of short-circuit protection- pulsed
Overload protection- yes

Interfaces:-
Communication interface- IO-Link
Transmission type- COM2 (38,4 kBaud)
IO-Link revision- 1.1
SDCI standard- IEC 61131-9
Profiles- Smart Sensor: Process Data Variable; Device Identification
SIO mode- yes
Required master port type- A
Process data analogue- 1
Process data binary- 2
Min. process cycle time[ms]- 2.3