WAGO 750-555, I/O System 750/753, 4-channel analog output

* Number of analog outputs- 4
* Total number of channels (module)- 4
* Signal type- Current
* Signal type (current)- 4 … 20 mADC
* Actuator connection- 4 x (2-wire)
* Resolution [bit]- 12Bit
* Data width- 4 x 16-bit data; 4 x 8-bit control/status (optional)
* Load impedance- Either 0 … 300 Ω or 300 … 600 Ω (same resistance for all load impedances)
* Conversion time (typ.)- 10ms
* Measurement error (reference temperature)- 25°C
* Measurement error, deviation (max.) from the upper-range value- 0.1%
* Temperature error (max.) of the upper-range value- 0.01%/K
* Output error, deviation (max.) of the upper-range value- 0.1%
* Temperature error (max.) of the output range value- 0.01%/K
* Recovery time (typ.)- 100ms
* Supply voltage (system)- 5 VDC; via data contacts
* Current consumption (system supply)- 60mA
* Isolation- 500 V system/field
* Indicators- LED (A) green: function; LED (B) red: Error
* Number of incoming power jumper contacts- 2
* Number of outgoing power jumper contacts- 2

* Width- 12 mm / 0.472 inches
* Height- 100 mm / 3.937 inches
* Depth- 69.8 mm / 2.748 inches
* Depth from upper-edge of DIN-rail- 62.6 mm / 2.465 inches

* Mounting type- DIN-35 rail
* Pluggable connector- fixed